The X REOLTEC Assembly took place last Monday in Madrid, Spain. REOLTEC, the technology platform of the Spanish wind industry, gathered in the event more than 50 representatives of the major wind energy companies.
Relevant issues as the technological response to the market situation and the new network codes, as well as the position of the industry in the offshore wind were addressed in the meeting.
In addition, some innovative R+D+I projects were presented and our project manager was there disseminating ACMWind. The attendees showed a great interest in the novel technology that will be adopted by ACMWind product. Several questions raised from the presentation which conducted to an interesting discussion regarding technology benefits.
We cannot tell you how proud and excited the ACMWind team is to continue working hard on this innovative solution that promises to revolutionize the wind energy market! Closer to turn a disruptive idea into reality.
Promising results obtained in field trials!
The image below displays in the frequency domain the signals measured in a commercial wind turbine using both conventional accelerometers and ACMWind acoustic system. This ´clean´ spectrum was obtained through a novel algorithm that reduces the noise in the acoustic signal. A significant correlation between signals measured with accelerometers and microphones were achieved proving ACMWind great performance.
Now the ACMWind team will be working on the last modifications in the hardware and software to get ready to market. Closer to turn a disruptive idea into reality.
Offshore Wind Energy 2017, one of the best events to exchange ideas, establish partnerships and to find out more about this increasingly competitive renewable industry, took place last week in London. With more than 400 exhibitors and impressive conference sessions, this remarkable event gathered around 10,000 participants from over the world.
The continuous pressure to reduce levelised cost of electricity (LCOE) has led in the past few years, leading and emerging players in the wind energy sector to develop longer rotors, taller towers and increase turbine power ratings. The latest technical challenges were exhibited in this event and the ACMWind could not be out of it.
Many visitors were introduced to ACMWind concept. Low-cost, reliable and non-intrusive, ACMWind is the first condition monitoring system to be launched on the market using an acoustic sensor array to detect faults in drivetrain components at an early stage.
ACMWind is set out to meet the wind industry growing demand and we are very pleased for getting visibility in such a major event. The combination of years of experience, passion, innovation and expertise are the core value that put ACMWind ahead of our competitors and for this reason we strongly believe in ACMWind success.
We look forward to seeing you in the next event!
Next week ACMWind team will be participating at the world’s largest offshore wind energy gathering: Offshore Wind Energy Exhibition 2017 in London.
Come and visit us at our booth S-J2 (TWI) to know more about ACMWind. Discover how our innovative low-cost acoustic condition monitoring system that detects failures in the rotating machinery of the wind turbine will revolutionize the wind energy market.
Offshore Wind Energy 2017
ExCel, London E16 1XL
Booth S-J2 (TWI)
Do not miss this opportunity. Hope to see you there!
We have prepared a Wind Energy Condition Monitoring survey in order to better define our product specifications according to our end-user needs.
Share with us your experience! Please click here . It will not take more than 5 minutes and your contribution will be highly valuable for ACMWind developments.
Wouldn´t it be good to know in advance if something is not going as should be with your wind turbine and repair it before it becomes serious and causes unplanned downtime?
With ACMWind you can get the most of your rotating machinery, listening to what it tells you! Our innovative system successfully installed in the north of Spain since September is currently being tested and will remain gathering data continuously until mid-2017. Based on acoustic principles, this condition monitoring system will be able to detect faults in the rotating machinery of wind turbines at an early stage.
At the moment, the acoustic data collected is being analysed to optimize the algorithms for fault detection at the earliest possible stage. Our next step is to develop Ad-hoc hardware and software with the specific requirements encountered.
We will keep you updated with the latest ACMWind news!
ACMWind team is delighted to inform that ACMWind prototype has been successfully installed in the north of Spain. The system currently under testing will remain installed in a 1.3 MW wind turbine at ‘Los Castrios’ wind farm, gathering data continuously until mid-2017.
This pioneer solution commits to be highly competitive in cost and performance compared to the existing systems on the market. Based on acoustic principles, this condition monitoring system for wind turbine rotating machinery will be able to early detect faults in the machinery by installing an array of microphones between the gearbox and generator as shown above.
We cannot tell you how proud and excited the ACMWind team is to continue working hard on this innovative solution that promises to revolutionize the wind energy market!
WindEurope Summit 2016, the world’s largest wind energy event, took place last week in Hamburg, Germany. The largest wind turbine manufactures and wind farm operators were present including Gamesa, Vestas, Enercon, Siemens, General Electrics, Iberdrola, Acciona and Dong Energy among others. In total, more than 1,200 exhibitors demonstrated their innovations and solutions from across the entire value chain of the industry.
In parallel with the exhibition, the WindEurope Summit conference was held with strong emphasis on the challenge to recover from the recent drop of investment in the wind energy industry in the recent years in Europe in order to meet the European targets of CO2 emissions reduction for 2020 and 2030. The main players agreed that reducing levelized cost of energy (LCOE) and favourable policies from governments would be the main solutions to recover investors to this industry.
In addition, the latest technical challenges including the necessity to reduce the cost of energy storage solutions, life extension and de-icing solutions for cold climate installations among others were addressed during the conference. Off-shore energy was one of the key topics in most of the sessions. The necessity to reduce the capital and operation and maintenances (O&M) costs of this plants were remarked as the key solutions to increase the competitiveness of this energy source.
Last week almost 200 people joined for the conference “Life extension challenges and solutions for operating wind farms” organized by AEE (Asociación Empresarial Eólica). The event took place in Madrid over two consecutive days, attracting the main sector players to discuss the status of the wind energy assets in the following years.
The wind sector in Spain faces the challenge of having 46% of the wind farms with more than 15 years by 2020 and 43% between 10 and 15 years. Given market constraints and lack of incentives for repowering, life extension has increasingly become an important solution for wind farm owners in Spain.
Such decision, as very emphasized there, should not be taken in the year 18th, but much earlier. It involves a precise diagnostic developed for each wind turbine individually, independently if few meters set apart one turbine to other. Monitoring alternatives to improve useful life and optimize performance and wind assets life extension certification were presented as well.
ACMWind team represented by our business developer had the pleasure to talk about our technology and ambitions as an innovative product to some participants who demonstrated great acceptance and interest. We are very proud of developing a product that will be highly competitive in cost and performance compared to the existing systems on the market!